Trimble 5603

* Trimble 5603 DR 200+ Total Station [ID- X1009]
– This Unit Has Been Calibrated
– Robotic
– Autolock
– 400Mhz Radio
– Firmware Version 696-03.08
* Trimble ACU Controller [ID- X1040] w/ Options..
– Trimble Survey Controller Software V10.80
– GPS Surveying
– TS Surveying
– Advanced Geodetic Support
* Trimble ACU Holder P/N: 571224091
* Trimble Multi-Adapter
* Trimble Multi Battery Charger w/ AC Adapter – Power Cord
* Werker WKA12-18NB 12V Battery w/ AC Adapter – Power Cord
* Werker Battery Charger Cable For ACU
* Werker Battery Cable
* Stylus
* Spare Fuses
* QTY. 3 International Adapters
* AC Adapter/Charger
* User Manual On CD-ROM
* Carrying Case For Accessories
* Case For Trimble ACU Unit
* Hard Carrying Case

Trimble 5603 DR200+ 3″ Robotic AutoLock Total Station w/ Firmware V696-03.08 & Trimble ACU Controller w/ Options GPS Surveying, TS Surveying & Advanced Geodetic Support

5603

Trimble 5603 DR200+ Total Station
The Trimble 5600 Total Station series gives you access to the best and most productive measuring methods available for every measuring situation for every measuring situation for unassisted operation.

Servo gives you a 30% productivity increase
The 5600 series is equipped with 4-speed servo operation that gives variable speed, faster, smoother and more accurate aiming. Servo is the platform for measurement automation and for further upgrades to increased productivity.

Upgrade to Autolock and the productivity increase is 50%
Autolock™ technology enables semi-robotic operation, with measuring and recording taking place at the total station. The 5600 series seeks out the RMT target (Active Remote Measuring Target), locks to it, and follows it during movement between points. No fine adjustments needed, no focusing, no problems working in the dark (the instrument will locate the target in any situation), and no work-related injuries from constant turning of the total station. In most cases the Autolock feature makes it possible to stake out and gather survey data as fast as the rodman can move.

Upgrade to Robotic and the productivity increase is 80%
Robotic operation offers the same advantages as Autolock—in addition, it allows you to work on your own. Robotic measuring offers more than increased productivity and reduced personnel costs. It also gives higher quality measurements all the control initiation and registering take place at the measuring point, where any errors or discrepancies are quickly identified.

Combine Robotic with DR200+ to double productivity
The long-range Direct Reflex EDM system (DR200+) option on the 5600 series allows you to measure up to 600 meters against a white object and 200 meters against Kodak Grey (the international standard to determine the range of reflectorless total stations). That’s 3.3 times further than any other reflectorless total station! And the range using a single prism is 5.5 kilometers. Combining DR200+ capability with robotic operation results in the ultimate total station.

True Integrated Surveying
There are situations where measuring by GPS is more productive than by using a conventional total station, and vice versa. Trimble Integrated Surveying™ solutions offer you the best of both worlds. Simply move the control unit from one system to the other in a matter of seconds and go on with your survey. The software environment is identical and the data flow seamless.

Features:

  • Autolock and Robotic Surveying for increased productivity
  • 4-speed servo
  • Active search system
  • Seamless data flow
  • Choice of User Interfaces

Specifications:

Accuracy
Accuracy SDV
5 – 200 m (16,4 ft – 656 ft)
±(3 mm + 3 ppm)
±(0.01 ft + 3 ppm
beyond 200 m (656 ft) (without reflector) ±(5 mm + 3 ppm)
±(0.016 ft + 3 ppm)
Shortest possible range: 2 m (6.5 ft)
Least count
Arithmetic mean value (D-bar):
Standard measurement (STD):
Fast standard (FSTD):
Tracking (TRK):
1 mm (0.005 ft)
1 mm (0.005 ft)
1 mm (0.005 ft)
10 mm (0.01 ft)
Measuring time (with reflector)
Arithmetic mean value (D-bar):
Standard measurement (STD):
Fast standard (FSTD):
Tracking (TRK):
Users decision
2 sec.
2 sec
0.4 sec.
Measuring time (without reflector)
Arithmetic mean value (D-bar):
Standard measurement (STD):
Fast standard (FSTD):
Tracking (TRK):
Users decision
2-10 sec
2-10 sec
0.4 sec.
Light source: IR Laser Diode
850 nm
Beam divergence
Horizontal:
Vertical:
0.4 mrad (4 cm/100 m)  (0.13 ft/328 ft)
0.8 mrad (8 cm/100 m)  (0.26 ft/328 ft)
Atmospheric correction: -60 to 195 ppm continuously
Angle Measurement
Accuracy (Standard deviation based on DIN 18723) 3” (1.0 mgon)
Angle reading (least count)
Number of decimals can be specified by the user
Arithmetic mean value (D-bar):
Standard measurement:
Fast tracking:
1” (0.1 mgon)
1” (0.1 mgon)
2” (0.5 mgon
Automatic level compensator
Dual-axis compensator with a working range of:
6’ (±100 mgon)
Range using a reflector
Range using Geodimeter prism 571 125 021. Standard clear
With one prism 5500 m (3.4 miles) (max.range
Range using Plastic Reflector 1500 m (0.9 miles)
Range using Reflex Tape 800 m (0.5 miles)
Range Direct Reflex measurement (typically):
Range Kodak Gray (18% reflective) >200 m (656 ft)
Range Kodak White (90% reflective) >600 m (1968 ft)
Concrete 200 – 300 m (656 – 984 ft)
Wood Constructions 150 – 300 m (492 – 984 ft)
Metal Constructions 150 – 200 m (492 – 656 ft)
Light Rock 150 – 250 m (492 – 820 ft)
Dark Rock 100 – 150 m (328 – 492 ft)
General
Aiming Servo-drive. Endless fine adjustment
Levelling
Compensator Dual axis compensator
Working range 6’ (±100 mgon)
Circular level in tribrach: 8’/2 mm (8’/0.007 ft)
Electronic 2-axis level in the LC-display with a resolution of: 6” (2 mgon)
Centering: Optical plummet in tribrach
Telescope Coaxial
Magnification: 26X (30X optional)
Focussing range: 1.7 m (5.58 ft) to infinity
Field of view 2.6 m at 100 m (8.5 ft at 328 ft)
Illuminated crosshair: Yes, variable (15 steps)
Operating temperature: -20°C to +50°C (-5°F to +122°F)
Data input/output: RS-232C Two-way communication
Batteries:
Central unit: rechargeable NiMH battery 12V, 1.6 Ah
External: rechargeable NiMH battery 12V, 3.5 Ah
Power consumption: 0.5A – 1.0A depending on use of servo, tracker, radio and type of measurement mode.
Weight
Instrument (incl. Geodimeter Control Unit): 6.4 kg (14.1 lbs)
Tribrach: 0.7 kg (1.5 lbs)
Internal battery: 0.4 kg (0.9 lbs
Instrument for robotic surveying:
(incl. Tracker and built in radio)
7.5 kg (16.5 lbs

 

Trimble ACU Controller
Trimble’s revolutionary ACU controller incorporates a sophisticated graphical display and Bluetooth™ technology. The result is a cable-free or on-board data collection solution that gives you even more flexibility than ever before.
The ACU is specifically designed to attach to Trimble field sensors—it simply clips on to your total stations, your robotic rovers, or your RTK GPS rover poles—whatever you are working with. The ACU provides a single user interface to the most advanced on-board applications available.

Graphical display
The easy-to-use, color touch-screen display provides you with ultimate control over your data. Instant results make light work of visualization, navigation, data selection, positioning, and stakeout. Errors and omissions are greatly reduced because you can thoroughly check your data in the field.

Cable-free
Built-in Bluetooth capability gives you a short-range cable-free solution at the pole—set up is quicker and cable hassles become a thing of the past.

Trimble 5603 Total Station

Compatibility
The ACU controller provides a common user interface for all your fieldwork regardless of the type of measurement technique or sensor used. The Trimble ACU is attachable to the “hot shoe” on the Trimble 5600 or 3600 Total Stations, Trimble 5600 robotic rover, and the Trimble 5800 RTK Rover pole.
USB, serial, and ethernet communications are provided as standard, giving you fast and flexible data transfer options. In addition, the ACU is Internet-capable, with an external wireless modem you can easily send and receive files while you’re in the field.

Choice of software
The Trimble ACU offers you a choice of software: Trimble Survey Pro software from TDS**, and Trimble Survey Controller™ software. In addition, the Windows CE operating system supports other specialized application software.

Built for the field
Trimble ACU is powered by the instrument, or the robotic/RTK rod holder. The internal battery provides one hour of stand-by operation when detached from the instrument or rover. Environmentally rated to IPX4, and able to withstand a drop of up to 1 meter (3.3 feet) onto a hard surface, the ACU is rugged enough for any job.
In addition the heated screen system allows for operation at extreme temperatures from –20° C (–4° F) to +55° C (122° F).
Dedicated instrument control keys provide rapid access to frequently used functions and minimize keystrokes during data, code, or attribute entry.
Both the color display and keyboard are illuminated so that you can keep working in low-light conditions. In full sunlight or total darkness the ACU is an all weather, all visibility controller for any time of the day or night.

Wide range of applications
The ACU is ideal for a wide range of survey and measurement applications, including:

  • Topographic surveys
  • High-accuracy GIS
  • Engineering
  • Construction
  • Architecture
  • Asset Management
  • Mapping
  • Cadastral


Specifications:

Power: External power input from instrument or pole holder
Internal NiMH rechargeable stand-by battery for 1 hour
Connects to external power supply through any of its ports to charge the internal battery pack.
Size: 196 mm × 110 mm × 30 mm (7.71″ × 4.33″ × 1.18″)
Weight: 560 g (1.23 lbs) including the internal battery pack
Temperature:
Operating
Storage
–20° to +55° C (–4° to +131° F)
–30° to +70° C (–22° to +158° F)
Environmental: Meets appropriate IEC 68, EN61000, MIL-STD-810E standards for temperature, moisture and immersion, dust and sand, drop test, shock, vibration and altitude.
Shock and vibration: Withstands shocks and vibrations according to IEC, EN6100, and MIL-STD specifications.
Certification: Class B Part 15 FCC certification, CE Mark approval and C-tick approval.
Bluetooth type approvals and regulations are country specific.
MultiPort I/O: 26-pin RS-232 (115 kbps) COM2; Ethernet 10-BaseT; USB client, power in/out, audio in/out
Hirose I/O: 4-pin RS-232 COM1; power in
Memory: 128 MB non-volatile flash memory
Display: Color, illuminated TFT, daylight readable touch screen 100 mm (3.9″) reflective color TFT-LCD; displayed at 320 × 240 pixels (QVGA) CCFL frontlight lluminated display
Touch screen: Passive touch screen, works with stylus or finger
Keyboard: 36-key tactile action, with navigation and dedicated instrument control keys. Full alphanumeric keyboard.
Audio: Integrated speaker and microphone, external capability through Multiport.

Buy, Sell, New, Used, Trimble 5603 Price

Trimble 5603 Spec Sheet